Trane Exergy S 180 Installation And Operation Manual page 47

Pos.
Cooled water in
1
Cooled water out
2
3 Energy collected
4 Cooling COP
5 Switch to the Process view
6 Heating COP
7 Power, 0–100%
Process view
The Process view allows you to view key process values and access different views
and settings. To view detailed information about a specific device (such as a pump or a
valve) and to change its settings, tap on the device's icon. To change a setpoint or limit
value, tap on the value.
EXES01 2150EN
Item Pos. Item
Cooled water temperature limit, tap to
8
change.
Start button. Green line = permitted to
9
start, tap to change.
10 Heating setpoint, tap to change.
11 Power consumption
12 Heated water out
13 Heated water in
14 Heat energy produced
45 (66)