Part Names And Functions; Microphone; Atnd1061Dan - Audio Technica ATND1061DAN User Manual

Part names and functions

Microphone

ATND1061DAN

1 2
1 Reset button
Insert the tip of a pin or other thin device and press this button to reset the microphone.
2 Indicator lamp
3 IR receiver
4
Release button
5 Hole for zip tie
6 Screw holes for VESA mount
Used when installing with a VESA mount.
7 Network A/B ports
Dante network ports. Used for connecting the LAN cable (CAT5e or higher). (Make sure to use conductor with a
diameter of 24AWG or larger and a shield.) Connect to the local area network and perform external control using the
application.
The power supply turns on when the network A port is connected to a PoE switching hub.
8
Analog output port
Used to connect the balanced cable.
+: Hot
−: Cold
G: Ground
9 Analog input port
Used to connect the balanced cable.
+: Hot
−: Cold
G: Ground
3 4
7
8
6
9
5 6
10
4
10
11
12