Acom JW-1C Owner's Manual page 9

Using the ADD Function
1. Get into counting mode by using any of the 3 ways of counting
(counting by unit weight, sample, or PLU.)
2. Place the batch of parts that you wish to add onto the platter.
3. Make sure that the Stable Lamp is on.
4. Press the ADD key. The displays will show:
Zero
Net
Stable
5. The Count display above shows 500 as an example.
The number in the Count Display represents the Running Total Count.
The Number in the Unit Weight display shows the number of times
batches have been added to the Running Total Count.
6. Remove the batch of parts that have just been added.
7. If there is another batch of parts you wish to add go to step 2 otherwise
continue on to step 8.
8. Press the SUM key. The displays will show:
Zero
Net
Stable
9. The Count display above shows 5000 as an example.
The number in the Count Display represents the Running Total Count.
The Number in the Unit Weight display shows the number of batches
that have been added to the Running Total Count.
10. If you wish to add more batches then press the SUM and return to step
2; otherwise, you can press the C key to clear the current Running
Total and start a new one.
7
WEIGHT / g
WEIGHT / g
UNIT WEIGHT / g
UNIT WEIGHT / g
MAX:1kg
MIN:2g
e = 0.1g
JW-1C
COUNT
Pcs
MAX:1kg
MIN:2g
e = 0.1g
JW-1C
COUNT
Pcs