Acom JW-1C Owner's Manual page 10

Program Mode
Programming PLUs by Sample:
1. Make sure the Zero and Stable Lamps are on.
2. Place the parts that you wish to count on the platter.
3. Enter the number of parts that you placed on the platter by using the
numeric keys. You cannot use the decimal key.
4. Make sure that the Stable Lamp is on.
5. Press the SAMPLE key.
6. Press the M
Zero
Net
Stable
7. Enter the tare weight for this PLU using the numeric keys. You may
use the decimal key if necessary.
8. Press the M
Zero
Net
Stable
The Number in the Unit Weight display represents the PLU number. It
can range from 0 to 31 for a total of 32 PLUs.
9. Enter the PLU number using the numeric keys. Keep in mind that if
you use an existing PLU number it will be overridden by the new data
that you have just entered.
10. Press the M
key. The displays will show:
WEIGHT / g
key. The displays will show:
WEIGHT / g
key. The PLU is stored.
UNIT WEIGHT / g
UNIT WEIGHT / g
MAX:1kg
MIN:2g
e = 0.1g
JW-1C
COUNT
Pcs
MAX:1kg
MIN:2g
e = 0.1g
JW-1C
COUNT
Pcs
8