Table of Contents
Advertisement
Programming PLUs by Unit Weight Entry:
1. Make sure the Zero and Stable Lamps are on.
2. Type the unit weight of the part. You may use the decimal key if
necessary.
3. Press the M
Zero
Net
Stable
4. Enter the tare weight for this PLU using the numeric keys. You may
use the decimal key if necessary.
5. Press the M
Zero
Net
Stable
The Number in the Unit Weight display represents the PLU number. It
can range from 0 to 31 for a total of 32 PLUs.
6. Enter the PLU number using the numeric keys. Keep in mind that if
you use an existing PLU number it will be overridden by the new data
that you have just entered.
7. Press the M
9
key. The displays will show:
WEIGHT / g
key. The displays will show:
WEIGHT / g
key. The PLU is stored.
UNIT WEIGHT / g
UNIT WEIGHT / g
MAX:1kg
MIN:2g
e = 0.1g
JW-1C
COUNT
Pcs
MAX:1kg
MIN:2g
e = 0.1g
JW-1C
COUNT
Pcs
Advertisement
Table of Contents
