Fitting The Cooling Unit To The Trolley; General; Screwing The Cooling Unit To The Trolley - Fronius CU 800i Operating Instructions Manual

Fitting the cooling unit to the trolley

General

The welding system can be fitted to a trolley to make the system (incl. cooling unit) more
mobile.
Screwing the
1
cooling unit to
the trolley
WARNING!
Danger due to devices toppling over.
This can result in serious personal injury
and damage to property.
▶
If the welding system is not equipped
with an auto-transformer, the cooling
unit must be installed right at the bot-
tom.
▶
Please see the user documentation
for the respective trolley for more in-
formation about the trolley.
Use the screws supplied with the trolley to
secure the cooling unit to the trolley.
35