Opt/I Cu Level Sensor; Opt Cu Front Coolant Connections; Opt/I Cu Torch Deflate - Fronius CU 800i Operating Instructions Manual

OPT/i CU level This option is available for the following devices:
sensor -
-
-
-
-
The option is installed as standard on the CU 1400i Pro/MC cooling unit.
The level sensor monitors the level of coolant in the cooling unit.
If both the OPT/i CU flow temperature sensor and the OPT/i CU level sensor options
are installed in the cooling unit, the level sensor works as follows:
-
If just the OPT/i CU level sensor option is installed in the cooling unit, the level sensor
works as follows:
-
OPT CU front This option is available for the following devices:
coolant connec- -
tions -
-
-
-
-
The option can be used in conjunction with the following power sources:
-
-
OPT/i CU Torch This option is available for the following devices:
deflate -
-
-
-
-
-
Prerequisites for using the OPT/i CU Torch deflate option:
-
-
The option facilitates emptying/filling the torch hosepack, e.g. when changing the torch
body.
The power source does not have to be switched off during this process.
CU 1100i
CU 1100i /460 V
CU 1100i /MV
CU 1100i /MV RVP
CU 1200i Pro /MC
If the coolant drops below the minimum level:
- the power source outputs a warning
- the welding current is not interrupted
- the cooling unit remains operational
If the coolant drops below the minimum level:
- the power source outputs an error message
- the level sensor interrupts the welding current
- the cooling unit switches off
CU 1100i
CU 1100i /460 V
CU 1100i /MV
CU 1100i /MV RVP
CU 1200i Pro /MC
CU 1400i Pro /MC
TPS 320i C
iWave 300i - 500i
CU 1100i
CU 1100i /460 V
CU 1100i /MV
CU 1100i /MV RVP
CU 1200i Pro /MC
CU 1400i Pro /MC
OPT/i CU flow temperature sensor installed in the cooling unit
OPT CU coolant connections installed in the front of the cooling unit
23