Changing The Set Ip Parameters - W&T Web-IO Digital 4.0 Manual

Inbetriebnahme
suggests the network parameters (subnet mask, gateway, DNS server) that also
apply to the PC. If you want the Web-IO to work in the same subnet as the PC, you
only need to adjust the IP address.
If you select Address range > any network, you can also enter parameters which
are different from your local network, for example to pre-configure the Web-IO for a
different network.

Changing the set IP parameters

To change the IP address, subnet mask, gateway or DNS server later, you can either
use Wutility again or adjust the parameters using the browser under Basic settings »
Network.
26