Repair And Extraordinary Maintenance; Maintenance Contacts (Only For Australia); Hmachine Disposal; Waste Storage - Electrolux N7E Installation And Operating Manual

NOTE!
It is advisable to stipulate a preventive and scheduled maintenance contract with the Customer Care Service.
Disassembly
• All scrapping operations must occur with the machine stopped and cold and the electrical power supply disconnected.
• Work on the electrical equipment must only be carried out by a qualified electrician, with the power supply disconnected.
• To carry out these operations it is necessary to use: overalls, safety shoes and gloves.
• During disassembly and handling of the various parts, the minimum height from the floor must be maintained.
G.9

Repair and extraordinary maintenance

NOTE!
Repair and extraordinary maintenance have to be
carried out by specialised authorised personnel,
who can ask the manufacturer to supply a servicing
manual.
G.10 Maintenance contacts (only for
Australia)
For service and spare parts, please contact:
H MACHINE DISPOSAL
WARNING
Refer to "Warning and Safety
Information"
H.1

Waste storage

At the end of the product's life-cycle, make sure it is not
dispersed in the environment. The doors must be removed
before scrapping the appliance.
SPECIAL waste materials can be stored temporarily while
awaiting treatment for disposal and/or permanent storage. In
any case, the current environmental protection laws in the
user's country must be observed.
H.2 Procedure regarding appliance
dismantling macro operations
Before disposing of the machine, make sure to carefully check
its physical condition, and in particular any parts of the
structure that can give or break during scrapping.
The machine's parts must be disposed of in a differentiated
way, according to their different characteristics (e. g. metals,
oils, greases, plastic, rubber, etc.).
26
• Electrolux - Tom Stoddart Pty Ltd — 39 Forest Way,
Karawatha QLD 4117 — call 1-300-307-289
• Zanussi - JL Lennard Pty Ltd — 42 Giffard Street, Silver-
water NSW 2128 — call 1-800-777-440
• Diamond - Semak Food Service Equipment — 18, 87– 91
Hallam South Road, Hallam VIC 3803 — call 03 9796 4583
Different regulations are in force in the various countries,
therefore comply with the provisions of the laws and compe-
tent bodies in the country where scrapping takes place.
In general, the appliance must be taken to a specialised
collection/ scrapping centre.
Dismantle the appliance, grouping the components according
to their chemical characteristics, remembering that the com-
pressor contains lubricant oil and refrigerant fluid which can be
recycled, and that the refrigerator components are special
waste assimilable with urban waste.
The symbol on the product indicates that this
product should not be treated as domestic
waste, but must be correctly disposed of in
order to prevent any negative consequences
for the environment and human health. For
further information on the recycling of this
product, contact the local dealer or agent, the
Customer Care service or the local body
responsible for waste disposal.
NOTE!
When scrapping the machine, any marking, this
manual and other documents concerning the appli-
ance must be destroyed.