New Holland 6010 Service Manual page 39

22. Loosen and remove the hollow nuts (1) ,from both
ends, and disconnect the hydraulic delivery pipe from
hydraulic pump.
23. Loosen hose clamp (1). Remove the hydraulic suction
hose (2) connecting hydraulic pipe to hydraulic filter.
24. Loosen the 4 bolts (1) and remove shield (2) on LH
side. Similarly remove the shield on RH side.
25. In case of Four-Wheel Drive (4WD), remove the pro-
peller shaft and the shields. Refer drive lines section
for removal details.
26. Remove the exhaust pipes referring to the "exhaus
pipe removal" process
27. Cut the plastic clamp and take out complete center
wiring to front side
28. remove wiring connections of alternator, sensor, WT
relay, OPS, FIP and starter solenoid.
29. Loosen and remove the two clamp bolts (1) and re-
move muffler pipe (2).
Engine - Engine and crankcase
47969433 28/11/2016
10.1 [10.001] / 20
21
GNIL14TR02022AA
22
GNIL14TR02023AA
23
GNIL14TR02024AA
24
GNIL14TR02025AA