Step 6. Attach top panel (part A) to assembled unit (parts B, C & E) using wood
dowels (part #5) and lock the hardware.
Step 7. Secure back brackets (part #6) at the corner of center back panel (part H)
using screws (part #1) and phillips head screwdriver.
Note: It is important to adjust levelers once fully assembled and upright. Extend
adjustable leveler until it's firmly in contact with the floor. If relocating, adjust
leveler as needed until it's firmly in contact with the floor in new Iocation.
Important: Safety strap kit (part #8) must be installed to preventing tipping, damage
and /or injury.
6