Step 2. Assembly - North Star M157115C.2 Owner's Manual

You must assemble your pressure washer before it can be used. Refer to Fig157115_6 and follow the
steps listed below:
INSTALL NOZZLES INTO
DESIGNATED NOZZLE
STORAGE LOCATION
Step 1. Install handle with six (6) 5/16-18 x 3/4" Flange Bolts through Base and Handle and secure with
six (6) 5/16-18 Flange Nuts.
Step 2. Install Hose Hook into right side of Handle using two (2) M8 Nuts.
Step 3. Install Nozzles into designated nozzle storage location.
Assembly and Initial Set-Up

STEP 2. ASSEMBLY

12
INSTALL HOSE HOOK INTO
RIGHT SIDE OF HANDLE
USING TWO (2) M8-1.25
NYLOC NUTS
5/16-18 X 3/4" SIX (6)
FLANGE BOLTS
5/16-18 X 3/4" SIX (6)
FLANGE NUTS
Fig157115_6