Step 2. Assembly; Handle & Billboard Assembly; Spray Gun Assembly; Step 3. Select Suitable Location - North Star 157121 Owner's Manual

Step 2. Assembly

Note: Remove contents from packaging to begin
assembly.
Handle & Billboard Assembly
1.) Attach handle to bumper tube using:
a. (2) Carriage Bolts (82233)
b. (2) T-Handle Knobs (38578)
2.) Attach billboard to handle using:
a. (4) Screws (87170)
3.) Insert the Nozzle's into the Nozzle Grommet

Spray Gun Assembly

4.) Attach the Lance to Spray Gun
a.) Tighten spin-on coupler hand tight.
Note: The o-rings create a seal so there is no need to
tighten with a wrench.

Step 3. Select Suitable Location

Moving and Handling

Lifting Hazard
The pressure washer is heavy. It can crush and cause
serious injury if it rolls out of control or tips over. Follow
the instructions below for safely moving the pressure
washer.
Moving your pressure washer around
• Use the handles to manually move the pressure
washer.
Initial Set-up
WARNING
• Push the pressure washer in front of you has you
walk.
• To turn, push down slightly on the handles and
pivot the pressure washer on its wheels.
Elevating or lowering your pressure washer
• To reduce risk of injury, it is recommended that
two adults lift the pressure washer.
• Only lift the pressure washer by the bumper and
handle. Do not use the pump or engine as a lifting
point.

Outdoor Use Only

1. WARNING
Location Hazards
Choose a suitable site for operating your pressure
washer to prevent possible death from carbon monoxide
poisoning or injury from fire/explosion, hot surfaces or
equipment tip-over.
Select a suitable outdoor location:
1. Never run the pressure washer in an enclosed
or partially enclosed location such as a building,
garage, barn, shed, or house. These spaces
can trap poisonous gases. Running a fan or
opening windows will not provide adequate
ventilation to prevent dangerous CO build-up.
2. Only use the pressure washer outdoors at least
20 feet from the home, away from windows,
vents, and air intakes, to allow proper
ventilation. If you start to feel sick, dizzy, or
weak while using the pressure washer, shut off
the engine and get to fresh air RIGHT AWAY.
3. Position the pressure washer so that the
exhaust fumes will not be directed towards
people or building air intakes.
4. Do not locate and use the pressure washer in
the presence of flammable vapors, dust, gases,
or other potentially combustible materials.
5. Ensure that working, battery-operated or battery
back-up carbon monoxide alarms are used in
any dwelling/structure that is in close proximity
to the running pressure washer.
6. Note that this pressure washer is NOT designed
or approved for use in vehicles or marine
applications. Never run the pressure washer
inside RVs or other vehicles, on boats, or on pick-
up truck beds.
13