Product Plates - Volvo EC15E Operator's Manual

Presentation
20

Product plates

Example of 17 digit PIN number on PIN
plate
A World Manufacturing Code
B Machine description
C Check letters
D Serial number
Product plates
The following illustrations and descriptions show
the product plates on the excavator.
When ordering spare parts or for short enquiries by
phone and in correspondence you should always
specify model designations and product
identification number.
1
1 Product identification plate (PIN)
The product identification plate contains name and
address of manufacturer, model/type designation
and 17 digit PIN number.
It also contains information about machine mass in
kg, engine net power in Kw, manufacturing year,
machine serial number and a CE-mark.
Machine mass
The machine mass in kg on the PIN plate is based
on the most standard definition of the machine in
accordance with ISO 6016.
2 Engine identification plate
The engine identification contains information
about manufacturer, designation and engine serial
number.
3 TOPS/ROPS and OPG plate
The plate is located inside the cab on the left back
column (in canopy under the roof). TOPS (Tip-
Over-Protection-Structure) and ROPS (Roll-Over-
Protection-Structure) provide roll over protection in
case the machine should turn over. OPG (Operator
Protective Structure) provides protection against
falling down objects.
3
2
V1199892