Maintenance - Volvo EC15E Operator's Manual

Maintenance

148
Maintenance
If the machine is to function satisfactorily and at
lowest possible cost, it requires careful
maintenance.
This section describes maintenance and service
jobs that the operator can do. Other maintenance
and service jobs require trained workshop
personnel, special equipment or spare parts and
should be done by a qualified service technician.
The chapter "Lubrication and service chart" (see
152 ) presents all the jobs and actions that are
page
included in the machine's service program.
Service history
After each completed service by a qualified service
technician, the service history should be filled in,
228 . Service history is a valuable
see page
document, which is referred to when selling the
machine.
Arrival Inspection
Before the machine leaves the factory, it is tested
and adjusted. The dealer or distributor must also
carry out arrival inspections according to the
applicable form.
Delivery Inspection
Before the machine leaves the factory, it is tested
and adjusted. The dealer or distributor must also
carry out delivery inspections according to the
applicable form.
Delivery Instructions
When handing the machine over, the dealer must
give the buyer "Delivery instructions" according to
applicable form, which must be signed, if the
warranty is to apply.
Service Programme
For any factory warranty to be valid, the machine
shall be maintained according to the service
program established by Volvo. The service program