Attachments, Connecting And Disconnecting - Volvo EC15E Operator's Manual

Operating techniques
108

Attachments, connecting and disconnecting

1
1
3
2
V1089894
Attachments, connecting and
disconnecting
WARNING
Risk of crushing.
Falling attachments could result in severe injury or
death.
Make sure the attachment bracket is properly
locked before starting work.
WARNING
Risk of crushing.
An unsecured attachment could fall and cause
serious injury or death.
Always ensure the attachment is properly secured
by pressing the front part of the attachment to the
ground until the machine is slightly lifted.
WARNING
Risk of serious injury or death.
Worn or damaged machine parts can cause
malfunction resulting in serious injury or death.
Check relevant machine parts regularly. If wear or
damage occurs stop operating immediately and call
for immediate corrective maintenance.
Installing a bucket with manual fastening
1 Position the excavating equipment to the bucket
to be installed.
2 Align bores in dipper arm and bucket.
3 Insert a Ø 20 mm (0.787 in) assembly rod into
the bore.
4 Raise the excavating equipment and operate the
bucket cylinder until the bores in bucket and
toggle link are in line.
5 Insert locking bolt (2) and secure it with the split
pin.
6 Remove assembly rod (1), insert locking bolt (3)
and secure it with the split pin.
NOTE!
Disassembly of the bucket takes place in reverse
order.