Touch Control Safety Functions; Sensor Safety Cut Off - Sharp KH-6V13BS00 User Manual

display ´L` is showed as a confirmation.
In the event the minute minder is still
running, it will proceed until ´00` is reached
and the timer will beep. After confirmation
of the timer running out, the appliance will
be fully locked. None of the buttons can be
used as long as the appliance is locked.
The child lock is deactivated the same way
it was activated. After pressing
the beep sounds, then the right and the
left of the slider button simultaneously for
at least 0.5 second, followed by pressing
only the left. As confirmation for successful
unlocking, the ´L` symbol in the displays
will be erased immediately.
Stop & Go
The Stop & Go function is used for pausing
the operation of the heaters during
cooking.White heaters are in operation,
if Stop & Go button is pressed for the
first time, all the heaters will be turned off.
After pressing
heaters will be turned on.

Touch Control Safety Functions

The following safety functions are
available to avoid unintended operations
of the hob control.

Sensor Safety Cut Off

A sensor monitoring is included to prevent
the appliance from unwanted, random
sensor operation.
In the event one or more buttons are
pressed for longer than 12 seconds,
the sensor monitoring routine audibly
until
indicates that the wrong operation has
occurred (pot or other object placed on the
button, sensor failure, etc.) and switches
off the appliance.
The safety turn off results in the hob
control being turned off to S-Mode. An
´F` will flash in all heater displays.
If residual heat is present, it will be
displayed in all other heater displays.
EN - 16
for the first time, all the