Advertisement
INSTALLATION
UNPACKING
This is to be carried out by the installer, who will
remove all interior and exterior packaging and
accessories.
NOTE TO THE INSTALLER: Stainless steel panels
and doors are protected with plastic film when
shipped. Prior to assembly, remove the film from
any surfaces to be joined together and thoroughly
clean the surfaces this exposed to remove any
residue adhesive. A small amount of white spirit
is suitable for this purpose. Once assembly is
complete you may remove the remainder of the
protective film and clean away any adhesive.
VENTILATION
The chosen site should permit ventilation around
the walls and ceiling, with a free circulation gap
of 3cm around the sides. There should also be
adequate ventilation for the refrigeration unit.
4
Advertisement
