Williams RMR1T Manual page 12

INSTALLATION - RMR3T - ROLL IN MODULAR RUBY
FIG 5.
FIG 6.
FIG 7.
12
FIG 8.
Ensure all the walls and jambs have been located
and camlocked together before lowering the roof
section onto them.
Please note that the roof is very heavy.
See figure 9.
FIG 9.
Fit the roof angle to the walls, jambs and roof using
the screws provided. See 'Fitting Roof Angle and
Floor Plate'.
Fit the floor angle if supplied and then fit the doors
onto the door jambs by lowering vertically onto the
hinges. See figure 10.