Table of Contents
Advertisement
Using the in-built telecoil
Push both the Increase and
Decrease buttons until 'T' shows
on the display.
Changing the volume
1. Push either the Increase or
Decrease buttons for more than
one second, until you hear a beep
and/or see a fl ashing 'V' on the
display.
2. Continue briefl y pushing either the Increase or
Decrease buttons until you reach the volume
level you want.
Note: If you do not have Sensitivity enabled, you can
access Volume with a short push of either the Increase or
Decrease buttons.
Resetting the sound processor
Press all three buttons (Select,
Increase and Decrease) together (for
at least one second) to return to the
default settings
Advertisement
Table of Contents
Need help?
Do you have a question about the Nucleus Freedom and is the answer not in the manual?
Questions and answers