Other Available U-Boot Commands - Z3 Technology Z3-DM8107-SDI-RPS User Instructions

11.3 Other Available u-boot Commands

Besides "boot-nfs" and "nand_boot_ubifs", there are other possible boot commands. All of the
possibilities are shown below:
setenv bootcmd run boot-nfs
setenv bootcmd run nand_boot_nfs
setenv bootcmd run nand_boot_jffs2
setenv bootcmd run nand_boot_ubifs
setenv bootcmd run nand_boot_ramdisk
The following scripts are also available to update the u-boot environment:
run update-uboot
run update-kernel
run update-env
run update-ramdisk
run update-jffs2
run update-ubifs
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
CONFIDENTIAL
Get kernel from TFTP, root file system from NFS
Get kernel from NAND, root file system from NFS
Get kernel from NAND, root file system from NAND (JFFS2)
Get kernel from NAND, root file system from NAND (UBIFS)
Get kernel from NAND, root file system from ramdisk
Update u-boot bootloader in NAND
Update Linux kernel image
Update u-boot environment settings
Update root filesystem ramdisk
Update jffs2 image (requires mtd-utils on host)
Update jffs2 image (requires ubi utils on host)
57
th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
DOC-USR-0030-13