EVS Neuron COMPRESS Installation And Operation Manual page 21

Adding Neuron to Cerebrum/Cortex
With Cerebrum/Cortex running on a computer connected to Neuron, follow these steps to discover the
Neuron processing boards and to configure it.
• When Cerebrum/Cortex is running, select Network and then Force Network Refresh. Make sure
that the PC's IP address is also set, to automatically get an IP address given by the same DHCP
server as Neuron.
• The Neuron frame and boards will appear in the System view. If the frame is not properly discovered,
please contact EVS support.
• The Cerebrum/Cortex device view should now display the Neuron graphical user interface, which
allows you to configure the processing module(s).
INSTALLATION AND OPERATION MANUAL
Neuron COMPRESS | 3. Quick Start | 9