Table of Contents
Advertisement
9.3.8
Menu "Alarm clock" – "Specifying "Signal tones"
Fig. 43:
Specifying signal tone
The menu is located in menu level "Alarm clock".
This menu item is used to select an signal tone for the alarm clock.
Use the following steps to select the signal tone:
1. Switch to menu "Alarm clock".
2. Switch to menu item "Specify signal tone".
–
The display shows the selection for the alarm clock.
3. For the signal tone, switch between the selection "Signal tone" or "Radio".
4. Confirm the selection for the signal tone.
–
The signal tones are now set.
Signal tones
Play radio
Tone signal
Table 10: Signal tones
Product manual 2CKA001373B5163
Preset
■
The favourite station is played when the alarm times is reached.
■
When the alarm time is reached a tone signal is output.
Operation
│58
Advertisement
Table of Contents
