Table of Contents
Advertisement
9.3
Operation - Configuration
The change to the configuration menu is only possible when the flush-mounted radio is
switched on.
To change to the configuration menu, perform the following steps:
1. Switch the flush-mounted radio on.
2. Press the "ENTER" button for at least 2 seconds.
–
The device switches to the configuration menu.
9.3.1
Display
Fig. 31:
Display overview of configuration menu
[1] Menu / menu level
[2] Menu number
[3] Previous menu item
[4] Selected menu item
[5] Next menu item
Product manual 2CKA001373B5163
Operation
│49
Advertisement
Table of Contents
