Fig. 2:
Device in as-delivered state: pulling off the attachment
–
If the device is in its as-delivered state, pull the attachment off the flush-mounted insert
with your hands.
–
Pull the attachment off only with your hands!
–
Do not lever parts off with screwdrivers or similar hard objects. This will damage the
device.
–
When pulling off, first the resistance of the spring clamps must be overcome.
Fig. 3:
Connection of loudspeaker cables / signal lines
2. Connect the loudspeaker cables and signal lines to the flush-mounted insert.
–
Both connecting terminals are plug-in terminals.
–
For the connection assignment, see chapter 7.4 "Electrical connection" on page 20.
–
The following options are available for connecting the plug-in terminals:
Loudspeaker (for more detailed information see chapter 7.5.1 "Loudspeaker" on
■
page 21)
AUX input / AUX output (for more detailed information see chapter 7.5.2 "AUX
■
(Auxiliary)" on page 23)
Antenna (for more detailed information see chapter 7.5.3 "Antenna" on page 25)
■
Product manual 2CKA001373B5163
Connection, installation / mounting
│16