Table of Contents
Advertisement
Rectification of problems for Bluetooth operation
If the Bluetooth icon is permanently displayed on the flush-mounted radio, the multimedia
device is connected.
Nothing can be heard on the flush-mounted radio.
■
–
The multimedia device is currently switched off (time out not yet reached).
–
The mute function on the multimedia device has been activated.
–
The volume on the multimedia device has been turned down to "Zero".
–
The player software of the multimedia device in pause mode.
–
This could be the case especially after the connection has been temporarily
disrupted.
–
You are at the boundary of the transmission range. While the signal is still strong
enough to maintain the connection, it is too weak to transmit sufficient data for playing
music.
The multimedia device cannot be connected, even though the flush-mounted radio is
■
displayed in the Bluetooth settings.
–
A different multimedia device is already connected to the flush-mounted radio.
–
Disconnect and uncouple the connected multimedia device in the flush-mounted
radio.
see chapter 9.3.19 "Menu "Bluetooth" – "Disconnect active device"" on page 69
see chapter 9.3.20 "Menu "Bluetooth" – "Uncoupling all devices"" on page 70
You must then couple and connect your multimedia device again because the list of
coupled devices stored in the flush-mounted radio has been deleted.
Product manual 2CKA001373B5163
Operation
│45
Advertisement
Table of Contents
