Table of Contents
Advertisement
Fig. 26:
Bluetooth
Use the following steps to play data on the flush-mounted radio:
1. Switch the flush-mounted radio on.
–
After the device is switched on, the favourite that was last listened to is displayed.
2. Press button "ENTER" [4] as often as required until you have changed to the Bluetooth
favourite.
–
The current favourite number [1] is shown at the top right-hand in the display.
–
After the change to the "Bluetooth" favourite, the Bluetooth function is active. The
Bluetooth icon [2] is displayed permanently. The device connected with the flush-
mounted device is displayed below the Bluetooth icon [3].
–
If the Bluetooth icon [2] flashes after the change to the "Bluetooth" favourite, no external
device is connected with the flush-mounted radio. The "Bluetooth" favourite is in
standby. The "Bluetooth" favourite is visible in the transmission range for other devices
and can be connected with the radio.
–
In this case an outgoing connection / coupling from the external multimedia device
must be established.
–
A coupling with the external multimedia device to the "Flush-mounted radio" must be
established. Check with the manufacturer of the multimedia device how this
connection is established.
Product manual 2CKA001373B5163
®
Operation
│40
Advertisement
Table of Contents
