Adjustment Initialization - Optex Water It TC-3000-DI Instruction Manual

When a 2-point adjustment is performed, the offset and span
Reference
adjusted values will automatically replace the values calculated
from the displayed and adjusted values of the 2-point adjustment.

Adjustment initialization

Reset the adjustment value to the factory default value.
Press
1
The measurement item selection display is displayed.
Select [Turb. TC-3000-D] using
2
TC-3000SP-D is also displayed as
[TC-3000-D].
Use
The adjustment menu is displayed.
Select [Initialize Adjustment Value]
3
using
The initialize adjustment value menu is
displayed.
Select [NO] or [YES] using
4
・ Selecting [Yes] executes initialization
and displays a progress bar.
・ Selecting [No] cancels initialization
and returns to the initialize
adjustment value menu.
During initialization a progress bar is
displayed.
After completion, the adjustment value
is initialized and the display returns to
the measurement value display.
.
, and press
to switch pages.
, and press
, and press
.
Sensor channel
.
.
Sensor model
Measurement item
27