5
Sensor Setting
The following settings are available from SC-U1.
To start sensor setting, press
Caution
Pressing
Display item (unit selection)
Set the unit of turbidity to show on the SC-U1 display.
Select an item from the following.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "5.1 Sensor Setting" and " ◆ Display Item".
When the display item is changed, the settings of "6 4-20 mA
Setting" P.15 and "7 Relay Setting" P.17 that have set the
display item become OFF.
Caution
In addition, the values of "9 Adjustment", "Span adjustment"
P.23, and "2-point adjustment" P.25 are reset to the factory
default values.
Set again if necessary.
automatically retains the measurement value.
Main display
.
13