Optex Water It TC-3000-DI Instruction Manual page 24

Measurement item [Display]
Turbidity [Turb.]
Press
1
The measurement item selection display is displayed.
Select [Turb. TC-3000-D] using
2
TC-3000SP-D is also displayed as
[TC-3000-D].
Use
The adjustment menu is displayed.
Select [Span Adjustment] using
3
Input a span adjustment value.
4
Select a digit by
value by
When a value outside the set range is entered, a short beep sounds.
Pressing
value to the factory default setting.
By pressing
24
Setting range
0.30 to 3.00
.
, and press
to switch pages.
, and press
, and press
simultaneously while entering a value resets the
or , the value returns to the one before changing it.
Factory default setting
1.00
.
Sensor channel
.
and
.
Sensor model
Measurement item