ConvaTec ESTEEM SYNERGY + Quick Start Manual page 2

Applying and wearing the pouch
2
Separate the side of
the pouch to allow
some air to enter.
4
Emptying and cleaning a drainable pouch
To empty pouch, tilt the tail
up towards your body. Peel
open the closure and unravel
tail. Unlock pouch closure and
open the tail by pushing in
both ends of the outlet end-
strips with fingers; drain pouch.
5
Emptying and removing the pouch
To remove pouch, peel from the
landing zone by holding the
tab on the adhesive ring with
one hand on the edge of the
transparent landing zone. Peel
the pouch downward with a
top-to-bottom rolling motion.
For more information, call us on -
®
TM indicates trademarks of ConvaTec Inc.
© 2016 ConvaTec Inc. AP-016057-GB OST032
Remove the release paper
from the adhesive ring
on the pouch.
Tips for cleaning the pouch:
Support the pouch with one
hand and wipe tail of pouch in
firm downward motion with
toilet tissue in other hand.
To remove baseplate, gently lift the
corner and peel away whilst
pressing down on the skin.
Only remove the pouch or
baseplate if replacing with a
new, clean pouch or baseplate.
0800 282 254
Softly fold the adhesive ring, apply
the lower half to the bottom of the
landing zone, then "roll or slide"
your fingers over the upper portion
to secure the pouch.
Clean the inside surface
of tail with toilet tissue or
baby wipe.
TIP
To ensure easy removal of
the baseplate use ConvaTec
Niltac™ Adhesive Removal
where appropriate.