Step 1; Step 2 - modway EEI-4074 Assembly Instructions

EEI-4074 & 4075 TABLE

STEP 1:

1. Take out the hardware package from the carton of Base (4).
2. Adjust each three holes at the bottom of
Bolts (A) into the matched holes of the bottom of
3. Use Allen Wrench (D) to tighten all Bolts (A) clockwise as shown.

STEP 2:

1. Carefully turn over the assembled Pole (3) and Base (4).
2. Adjust each three holes of
the matched holes of
3. Use Allen Wrench (D) to tighten all Bolts (A) clockwise as shown.
Customer Service 609-256-9000︱www.modway.com
Pole
Fixing Plate
(2) and Pole (3) to be matched, then insert 3 pieces of Bolts (A) into
Fixing Plate
(2) and Pole (3) as shown.
(3) and Base (4) to be matched, then insert 3 pieces of
Pole
(3) and Base (4) as shown.
Page 2 of 3