modway EEI-4074 Assembly Instructions

EEI-4074 & 4075 TABLE

Thank you for purchasing the MODWAY SIDE TABLE.

Before you start, here are some helpful advice:

1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step

instructions.

2. Owing to the size and weight of the Top and Base, we recommend that it is assembled by two adults, on a

carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.

3. Please do not use any tools other than those provided or recommended in these instructions.

4. Please do not throw away any of the packaging or the instruction until you have checked all the components

and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

and environmentally friendly way.

5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten

the components from time to time, so please save the tools that have been provided.

6. Please keep all pieces out of reach of children.

1. Top

TOP SKU LIST: EEI-1115, EEI-1116, EEI-1122, EEI-1123, EEI-1124, EEI-1128, EEI-1129, EEI-1136, EEI-1139, EEI-1140, EEI-1117,

EEI-1118, EEI-1125, EEI-1130, EEI-1131, EEI-1137, EEI-1832, EEI-1833, EEI-1834

Customer Service 609-256-9000︱www.modway.com

2. Fixing Plate

Bolt M8x30mm

Bolt M8x18mm

Flat Washer

Allen Wrench

3. Pole

4. Base

Page 1 of 3

Table of Contents

Need help?

Do you have a question about the EEI-4074 and is the answer not in the manual?

Page 1 EEI-4074 & 4075 TABLE Thank you for purchasing the MODWAY SIDE TABLE. Before you start, here are some helpful advice: 1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2. Owing to the size and weight of the Top and Base, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
Page 2 EEI-4074 & 4075 TABLE STEP 1: 1. Take out the hardware package from the carton of Base (4). Pole (3) and Base (4) to be matched, then insert 3 pieces of 2. Adjust each three holes at the bottom of...
Page 3 EEI-4074 & 4075 TABLE STEP 3: 1. Please put Top (1) upside down on a carpeted or padded surface. Fixing Plate 2. Adjust each four holes of the bottom of Top (1) and (2) to be matched, then insert 4 pieces of...

Eei-4075