Table of Contents
Advertisement
8
Initial Set-up
Configuring the 890 Drive
The DSE 890 Configuration Tool is Parker SSD Drives' Windows-based block
Note:
programming software and is supplied with each drive.
Use the DSE 890 Configuration Tool to configure the RESOLVER function block, as detailed
below.
You will require a PMAC (Permanent Magnet AC) Configuration when using DSE 890: create
a "New Configuration" in DSE 890 and select "890 Permanent Magnet AC" in the dialog box.
Double-click on the MOTOR CONTROL function block in the new configuration to display the
RESOLVER function block.
DSE 890 offers a "Motor Wizard" to quickly enter parameter information into the RESOLVER
function block: from the menu at the top of the screen select Edit → Motor Wizard. In the pop-
up dialog box you can now select the motor and resolver from the drop-down lists.
Alternatively, you can enter parameter information directly into the RESOLVER function block.
The parameters are described below.
RESOLVER Function Block
SETUP::MOTOR CONTROL::RESOLVER
This block allows Speed Feedback to be measured using a resolver.
Only parameters relevant to the Resolver are described below.
Note:
Parameter Descriptions
NAME
Resolver name/designation
POLES
Number of resolver poles. In case of multi-pair poles resolver, the resolution of the resolver
option is multiplied by the number of pair poles.
RATIO
Transformation ratio of the resolver
SPEED MAX
Mechanical maximum speed supported by the resolver.
ACCURACY
This parameter represents the nominal accuracy of the resolver. (This information is only
informative and could be left unspecified).
CARRIER VOLTAGE
This parameter represents the nominal carrier voltage for the resolver. (This information is
only informative and could be left unspecified).
CURRENT
This information represents the nominal current needed to run the resolver. (This information
is only informative and could be left unspecified).
INERTIA
This information represents the resolver rotor inertia. (This information is only informative
and could be left unspecified).
8902/RE Resolver Speed Feedback Option
All manuals and user guides at all-guides.com
Range:
Range: 2 to 20
Range: 0.2 to 1.0
31
Range: 0 to 2
(user units)
Range: 0 to 60.0 minutes
Range: 5.0 to 10.0 Vrms
Range: 0.0 to 70mA rms
Range: 10.0 to 100000 Kgcm²
Advertisement
Table of Contents
