Exit Shock Sensor Adjustment Mode; Reset Shock Sensor To Default Setting - Clifford 10.5X Owner's Manual

➜

Exit Shock Sensor Adjustment Mode:

The adjustment mode will be exited if:
➤ ➤
No input from transmitter for 15-seconds.
➤ ➤
No input from sensitivity testing for 15-seconds.
➤ ➤
The ignition is turned On.
➤ ➤
The Valet button is pressed.
The siren and LCD remote will emit 1 long beep and the LED
will extinguish when shock adjustment mode is exited.
➜

Reset Shock Sensor to Default Setting:

The shock sensor can be restored to a default setting of 10 to
facilitate re-adjustment at any time w w h h i i l l e e i i n n adjustment mode.
1. Simultaneously press the
2. The LCD remote will emit 3 quick beeps to indicate the
sensor has been reset to level 10 (mid-range).
3. The system returns to shock sensor adjustment mode for
further adjustment, if required.
© 2005 directed electronics, inc.
and buttons.
39