Sensors; Remote Adjustable Dual-Zone; Shock Sensor - Clifford Solaris 5 Installation Manual

Clifford solaris 5 remote start and auto security system
Hide thumbs Also See for Solaris 5:
Table of Contents

Advertisement

sensors

remote adjustable dual-zone shock sensor
The remote adjustable dual-zone shock sensor is a magnetic resonance sensor com-
bined with circuitry that allows for adjustment of both warn away and full trigger
zones. The Clifford Radar 2 transmitter is used to adjust this sensor.
The best operation of this sensor is obtained when mounted to an underdash wire har-
ness. It can be also mounted to other surfaces (vent tubing, flat metal surfaces, or
steering column), but coverage of the vehicle exterior may be reduced. Ensure to
mount the sensor close enough to the control module to make the harness connection.
adjusting the shock sensor
C C A A U U T T I I O O N N : : DO NOT strike the window glass or flat sheet metal panels that can dent easily. It is rec-
ommended that you only strike the metal pillars between the windows, they are structurally sound
enough not to dent. ONLY strike the pillars using the heel of your hand, it is more than sufficient for
the sensor to distinguish this as a theft attempt.
N N O O T T E E : : You MUST exit using the ARM/DISARM button after programming to lock in the new settings!
Read the following instructions thoroughly for a full understanding of how to prop-
erly adjust this sensor.
1.
Disarm system
2.
Transmit Channel 15. (Press
The LED will turn on and the siren will chirp 1 time.
Primary (full trigger) zone adjustment has now been entered.
Primary zone can now be adjusted.
3.
Adjusting Primary Zone
N N O O T T E E : : There are 16 distinct pitch settings, if the upper or lower limit of the 16 settings is reached
the siren will emit 2 chirps at the default pitch.
Press
chirps will decrease in pitch.
Press
chirps will increase in pitch.
The sensor Primary zone can be tested at any time during adjust-
ment by striking the vehicle which will generate 1 siren chirp each
time the zone is activated.
50
of the remote control to increase sensitivity. The siren
of the remote control to decrease sensitivity. The siren
3 times then
1 time)
www.directed.com

Advertisement

Table of Contents
loading

Table of Contents