Band Shortening Instruction For Models 1 + 5; Time Setting; Replacement Of Battery (Sr626Sw); Cleaning Instructions - Auriol 2-LD5039 Usage And Safety Instructions

Band shortening instruction for models 1 + 5

Band shortening can be accomplished by removing links. Open the band clasp
safety and open the clasp. The band is held to the clasp by a spring bar. Image 1.
Compress and remove the spring bar by using a pointed tool. Now place the
watch face down on a soft surface. Image 2. The links that can be removed are
marked with an arrow. Image 3. Place the band in the band shortening tool in
such a way that the pointed end of the tool points directly at the metal rod and the
metal rod can be pushed out in the direction of the arrow. Carefully turn the screw
clockwise until the metal rod is pushed out a small distance. The rod can now be
pulled out (using pliers if necessary). The strap can now be taken disassembled.
Remove as many links as necessary using this method. Reinsert the rod in the
opposite direction of the arrow and push it back into the band. The strap and clasp
can now be reassembled.
A replacement tip for the tool is included in the bottom of the tool.
An instructional video is available for online viewing at the following URL:
http://specials.lidl.com/videos/nou9nohN/
...or simply scan the following QR code:

Time setting

Carefully pull the crown out all the way. Turn the crown clockwise or counter
clockwise to set the time. To finish the setting press the crown back in all the way.

Replacement of battery (SR626SW)

Battery replacements must be performed by an expert to avoid damaging the case
or gaskets.

Cleaning instructions

Clean the wristwatch with a soft, dry and lint-free cloth. A glasses cleaning cloth is
ideal.
- 4 -