System Maintenance Mode - Citizen CLP-7001 User Manual

5

System Maintenance Mode

In this mode, the communication, adjustable sensor ON/OFF and sensor voltage
selections are set up. The printer configuration settings are stored in memory so they are
maintained even after the power is turned off. Control keys function as follows:
Pressing all these keys
simultaneously places the printer
into system maintenance mode.
Example
Setting the black line sensor voltage
1. First turn off the power switch, then press and hold down the Pause, Feed and Stop keys
simultaneously while turning on the power switch.
2. Change the baud rate to the sensor voltage setting with the Pause key.
9600bps
ON LINE
PE.*.**V
28
Before Operation
Return to normal
operating mode.
Selects the mode item.
Selects the mode.
9600bps