Using Narrow Paper (Head Pressure Adjustments) - Citizen CLP-7001 User Manual

Thermal transfer bar code printer
Hide thumbs Also See for CLP-7001:
Table of Contents

Advertisement

2 Using Narrow Paper
The printer has already been factory-set to the paper width of 112 mm (4.4 in). When you use
narrow paper, adjust the head pressure as follows:
1.
Looking at the check window on the upper frame, align the mark (the left edge of white
plastic) with the width of the paper. (The print head is closed.)
2.
Make fine adjustments, checking the print.
(a) When the print on right side is too light:
Move the mark to the right by turning the head pressure adjustment screw clockwise.
(b) When the print on the left side is too light:
Move the mark to the left by turning the head pressure adjustment screw
counterclockwise.
※ These adjustments are useful for preventing ribbon wrinkle or paper skew. For more
details, consult our service personnel.
(Head Pressure Adjustments)
Check window
45
Chapter 3 Paper and Ribbon
Width of paper
25.4 mm
1 in
50.8 mm
2 in
76.2 mm
3 in
101.6 mm
4 in
When ribbon wrinkles or paper
skews with paper width of 4 in or
more
Factory setting

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clp-7002Clp-7401

Table of Contents