Video Mode; Selecting Input Source - Christie 38-VIV402-01 User Manual

VIDEO INPUT
When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from
video equipment to R/Pr, G/Y and B/Pb jacks.
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2 Press POINT DOWN button to move a red arrow pointer to Input
2 and then press SELECT button. Source Select Menu will
appear.
3 Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to "Y, Pb/Cb, Pr/Cr" and then press SELECT button.
When connecting to those equipment, select a type of Video
source in SOURCE SELECT (VIDEO) Menu.
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2 Press POINT DOWN button to move a red arrow pointer to Input
3 and then press SELECT button. Source Select Menu will
appear.
3 Move a pointer to source that you want to select and then press
SELECT button.
When video input signal is connected to VIDEO jack,
Video
select Video.
When video input signal is connected to S-VIDEO jack,
S-Video
select S-Video.
When video input signal is connected to VIDEO/Y, C
Y, C
jacks, select Y, C.

SELECTING INPUT SOURCE

WHEN SELECT INPUT 2 (5 BNC SLOT )
WHEN SELECT INPUT 3 (AV TERMINAL )
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 2 and press SELECT
button.
Input 2
Source Select Menu
Move a pointer to
Y, Pb/Cb, Pr/Cr and press
SELECT button.
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 3 and press SELECT
button.
Input 3
Source Select Menu (VIDEO)
Move a pointer to source and
press SELECT button.
35