LGB 55027 Manual page 11

CV Description
1 Locomotive address (Standard short)
2 Start up voltage
3 Acceleration value
4 Delay value
5 Max. speed
6 Mittlere Fahrgeschwindigkeit
5 + 6 When programming with older 55015
universal hand controller:
CV 6 = CV number to be programmed.
CV 5 = function value
7 Reset
9 Motor frequency
13 Function F analog outputs
17 Long locomotive address
18 Long locomotive address
29 NMRA configuration register
49 Load readjustment / function activation
and other functions
50 Lights: voltage value
Range Notes
1 – 127 (3) Only when CV 29, Bit 5 = 0
1 – 255 (2)
1 – 255 (3)
1 – 255 (3)
1 – 255
(255)
1 – 255 (64)
55 = Basic values
66 = Motor values
77 = Function values
0 – 3 (0) 16 / 2 / 0.4 / 0.06 kHz
0 – 63 (3)
128 – 10239 When CV 29, Bit 5 = 32
(128)
(4) Bit 0 = Direction of travel/(0/1)
Bit 1 = Number of speed levels (14/28) (0/2)
Bit 2 = Mode of operation (digital / analog+digital) (0/4)
Bit 5 = short / long address (0/32)
(7) Bit 0 = Function activation parallel/serial (0/1)
Bit 1 = Digital load readjustment (0/2)
Bit 2 = Analog load readjustment (0/4)
1 – 32 (32) Here you can set the voltage for the light outputs.
11