Basic Operation; Adjusting Screen; Zoom Adjustment; Focus Adjustment - Christie VIVID 38-VIV205-01 User Manual

BASIC OPERATION

Press ZOOM button on Top control panel or ZOOM
1
on Remote Control Unit. Message "Zoom" is displayed.
Press ZOOM
2
larger, and press ZOOM
to make image smaller.
Press FOCUS button on Top control panel or FOCUS
1
button on Remote Control Unit. Message "Focus" is displayed.
Adjust focus of image by pressing FOCUS
2
POINT UP/DOWN button(s) .
NOTE;
Focus adjustment may not function properly if the image is
corrected by KEYSTONE adjustment.
Press LENS SHIFT button on Top control panel or LENS SHIFT
1
/ button on Remote Control Unit. Message "Lens shift" is
displayed.
2 Press the POINT UP button or LENS SHIFT
image up, press the POINT DOWN or LENS SHIFT
move image down.
If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.
1 Press KEYSTONE button on Remote Control Unit or select
Keystone on SETTING menu. (Refer to page 35.) Keystone
dialog box appears.
Correct keystone distortion by pressing the POINT
2
UP/DOWN/LEFT/RIGHT button(s). Press the POINT UP button
to reduce the upper part of the image, and press the POINT
DOWN button to reduce the lower part. Press the POINT LEFT
button to reduce the left part, and press the POINT RIGHT
button to reduce the right part.
Reduce the upper width
with the POINT UP button.
20

ADJUSTING SCREEN

ZOOM ADJUSTMENT

button or the POINT UP button to make image
button or the POINT DOWN button

FOCUS ADJUSTMENT

LENS SHIFT ADJUSTMENT

KEYSTONE ADJUSTMENT

Reduce the lower width with
the POINT DOWN button.
/ button
Message disappears after 4 seconds.
/
/ button or the
Message disappears after 4 seconds.
button to move
button to
• Arrows are white in no correction.
• Arrow(s) of direction being corrected turn(s) red.
• Arrow(s) disappear(s) at the maximum
correction.
Reduce the left part with
the POINT LEFT button.
Zoom
Focus
Lens shift
Reduce the right part with
the POINT RIGHT button.