Advertisement
Interfaces
Conformity
6
Ethernet interfaces
Plug
Interface type
Bit rate
Protocol
Cabling, cable type
Cable length
Screw terminals, plug-in
Cu-wire or Cu-strand with wire end sleeve
Cu-strand without wire end sleeve
Stripping length
Screwdriver
Max. tightening torque
USB interface (4G internet connection)
Plug
Interface type
Bit rate
Max. load
Max. cable length
Ambient conditions and protection classification
Classification as per EN 60730
Automatic action
Control function
Degree of pollution
Overvoltage category
Design
3 x RJ45, shielded
10Base-T / 100Base-TX, IEEE 802.3 compatible
10/100 Mbps, autosensing
BACnet on UDP/IP, Modbus TCP/IP, KNX IP, Haystack
over RESTful API, OPC UA, oBix, Sedona, and SQL.
10 Mbps: Min. CAT3, shielded cable is recommended
100 Mbps: Min. CAT5, shielded cable is recommended
Max. 100 m (330 ft)
2
1 x 0.6 mm ∅ to 2.5 mm
(22 to 14 AWG)
2
or 2 x 0.6 mm ∅ to 1.0 mm
(22 to 18 AWG)
2
1 x 0.6 mm ∅ to 2.5 mm
(22 to 14 AWG)
2
or 2 x 0.6 mm ∅ to 1.5 mm
(22 to 16 AWG)
6...7.5 mm (0.24...0.29 in)
Slot screws, screwdriver size 1 with shaft ø = 3 mm
0.6 Nm (0.44 lb ft)
Type A
USB 2.0
480 Mbit
500 mA
5 m
Type 1
Class A
2
III
Suitable for use in protection class I or II systems
Advertisement
