Table of Contents
Advertisement
Starting Up
Start/Pause button
•
To start up the washing machine you have to press the Start/Pause button
(Figure 27).
•
The time remaining (in minutes) until the end of the programme will
appear on the display at all times.
Lock Function
Lock function selection
•
The lock function ensures that the programme will not be affected if any
buttons are pressed. It is used when children could press the buttons, etc.
•
The lock function should be activated after the wash programme has been
selected together with all its options.
Activating the lock function
•
The lock function is activated by pressing the Start/Pause button and
holding it down for at least 3 seconds (Figure 28).
•
The display will show the lock symbol if it is activated.
Deactivating the lock function
•
The lock function is cancelled when the wash programme comes to
an end (Figure 29).
•
If you want to deactivate the lock function before the end of the
programme, you have to hold the Start/Pause button down again for at
least 3 seconds.
•
After 3 seconds, the lock function indicator will disappear from the display,
and it will go into pause status.
•
The Start/Pause button does not cancel the lock function.
16
STARTING UP AND
6
BLOCK FUNCTION SELECTION
STARTING UP
Start/pause button
a To start up the washing machine you
have to press the start / pause button.
The display will constantly show the
minutes left until the wash is over.
STARTING UP AND
6
BLOCK FUNCTION SELECTION
BLOCK FUNCTION
STARTING UP
Block function selection
Start/pause button
The various buttons can be blocked to prevent
them from being pressed and affecting the
a To start up the washing machine you
selected wash programme and options. This
have to press the start / pause button.
can be used to stop children playing with the
The display will constantly show the
buttons, etc.
minutes left until the wash is over.
The block function should be activated after
the wash programme has been selected
together with all its options.
STARTING UP AND
6
BLOCK FUNCTION SELECTION
Activating the block function
a The block function is activated by
pressing the start/pause button and
holding it down for at least 3 seconds.
The display will show if it is activated.
BLOCK FUNCTION
STARTING UP
Deactivating the block function
Block function selection
b The block function is cancelled when
Start/pause button
The various buttons can be blocked to prevent
the wash programme comes to an end.
them from being pressed and affecting the
a To start up the washing machine you
If you want to deactivate the block
selected wash programme and options. This
have to press the start / pause button.
function before the end of the
can be used to stop children playing with the
The display will constantly show the
programme, you have to hold the start
buttons, etc.
minutes left until the wash is over.
button down again for at least 3 seconds.
The block function should be activated after
After 3 seconds, the block function
the wash programme has been selected
indicator will disappear from the display,
together with all its options.
and it will go into pause status.
The ON/OFF button does not cancel
Activating the block function
the block function.
a The block function is activated by
pressing the start/pause button and
holding it down for at least 3 seconds.
The display will show if it is activated.
BLOCK FUNCTION
Deactivating the block function
Block function selection
b The block function is cancelled when
The various buttons can be blocked to prevent
the wash programme comes to an end.
them from being pressed and affecting the
If you want to deactivate the block
selected wash programme and options. This
function before the end of the
can be used to stop children playing with the
programme, you have to hold the start
buttons, etc.
button down again for at least 3 seconds.
The block function should be activated after
After 3 seconds, the block function
the wash programme has been selected
indicator will disappear from the display,
together with all its options.
and it will go into pause status.
The ON/OFF button does not cancel
Activating the block function
the block function.
a The block function is activated by
pressing the start/pause button and
holding it down for at least 3 seconds.
The display will show if it is activated.
Deactivating the block function
b The block function is cancelled when
the wash programme comes to an end.
If you want to deactivate the block
function before the end of the
programme, you have to hold the start
button down again for at least 3 seconds.
After 3 seconds, the block function
indicator will disappear from the display,
and it will go into pause status.
The ON/OFF button does not cancel
the block function.
using the appliance
a
using the appliance
a
a
using the appliance
b
a
a
b
a
84
b
84
84
fig. 27
fig. 28
fig. 29
Advertisement
Table of Contents
