Time Delay; Starting Up - CDA CI931 Manual For Installation, Use And Maintenance

Starting Up

Start/Pause button
To start up the washing machine you have to press the Start/Pause button
(Figure 29).
The time remaining (in minutes) until the end of the programme will
appear on the display at all times.
Lock Function
Lock function selection
The lock function ensures that the programme will not be affected if any
buttons are pressed. It is used when children could press the buttons, etc.
The lock function should be activated after the wash programme has been
selected together with all its options.
Activating the lock function
The lock function is activated by pressing the Start/Pause button and
holding it down for at least 3 seconds.
The display will show the lock symbol if it is activated (Figure 30).
Deactivating the lock function
The lock function is cancelled when the wash programme comes to
an end (Figure 31).
If you want to deactivate the lock function before the end of the
programme, you have to hold the Start/Pause button down again for at
least 3 seconds.
After 3 seconds, the lock function indicator will disappear from the display,
and it will go into pause status.
The Start/Pause button does not cancel the lock function.
16
drying
time
delay
imer option
fig. 29
drying drying
time time
delay delay
imer imer option option
fig. 30
drying
time
delay
imer option
fig. 31