Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for JB Systems ALIEN

  • Page 3: Before Use

    ENGLISH USER MANUAL OPERATION MANUAL ® Thank you for buying this JB Systems product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES •...
  • Page 4: Safety Instructions

    • Please use the original packing when the device is to be transported. • Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy. JB SYSTEMS® 2/15 ALIEN...
  • Page 5: Laser Safety Instructions

    This valuable document can be obtained from www.laserinstitute.org Please note that JB SYSTEMS cannot be made liable for damages caused by incorrect installations and unskilled operation! WARNING LABEL LOCATIONS A.
  • Page 6: Control Panel

    With this knob you can set the input sensitivity of the build-in microphone. 14. ON/OFF KEY ACTIVATED SWITCH: used to switch the unit on/off. Use the keys to make sure only a skilled operator is able to switch the laser on. JB SYSTEMS® 4/15 ALIEN...
  • Page 7: Overhead Rigging

    CAUTION EYE DAMAGE: Always position the laser in a way that prevents the audience from looking directly into the laser beams. The installation should assure that the beam will not strike the audience. JB SYSTEMS® 5/15 ALIEN...
  • Page 8: How To Set Up And Control The Unit

    • Now use the [UP] or [DOWN] to browse the different automatic modes. • Press the [ENTER] button to select the desired automatic mode: [AutP] = Wash projector effects [AP 1] to [AP 8] [Autb] = Led Beam effects [Ab 1] to [Ab10] JB SYSTEMS® 6/15 ALIEN...
  • Page 9: Slave Mode

    • Use the [UP] or [DOWN] buttons to select the desired DMX address • Press the [ENTER] button to confirm the DMX address Note: the display blinks when the unit is in DMX-mode and no DMX-signal is detected. JB SYSTEMS® 7/15 ALIEN...
  • Page 10: Channel Dmx-Mode

    AL03/ SL03 131-172 AL04/ SL04 Laser 173-214 AL05/ SL05 215-255 AL06/ SL06 000-005 Blackout 006-032 AF01/ SF01 033-064 AF02/ SF02 065-096 AF03/ SF03 Strobe 097-128 AF04/ SF04 129-160 AF05/ SF05 161-192 AF06/ SF06 193-224 AF07/ SF07 JB SYSTEMS® 8/15 ALIEN...
  • Page 11 AL02/ SL02 089-130 AL03/ SL03 Laser 131-172 AL04/ SL04 173-214 AL05/ SL05 215-255 AL06/ SL06 000-005 Blackout 006-032 AF01/ SF01 033-064 AF02/ SF02 065-096 AF03/ SF03 Strobe 097-128 AF04/ SF04 129-160 AF05/ SF05 161-192 AF06/ SF06 JB SYSTEMS® 9/15 ALIEN...
  • Page 12 049-089 090-131 LASER 132-173 R flash G on 174-215 R on G flash 216-255 RG flash 000-005 No Strobe 006-250 Strobe slow to fast(0.3HZ-20HZ) 251-255 Sound activated Stop CH10 001-127 Rotate clock from slow to fast JB SYSTEMS® 10/15 ALIEN...
  • Page 13 229-242 Color change 2 243-255 Color change 3 000-005 No Strobe If 6CH is 006-250 Strobe slow to fast(0.3HZ-20HZ) 006-214 251-255 Strobe activated by sound CH17 If 6CH is 000-250 Show speed, 0: slow, 250: fast JB SYSTEMS® 11/15 ALIEN...
  • Page 14 Strobe slow to fast(0.3HZ-20HZ) 006-214 251-255 Strobe activated by sound CH21 000-250 Show speed, 0: slow, 250: fast CH20 = 215-255 251-255 Sound active 000-005 Black out 006-048 048-89 CH22 090-131 132-173 R flash G on JB SYSTEMS® 12/15 ALIEN...
  • Page 15 089-130 AL03/ SL03 131-172 AL04/ SL04 173-214 AL05/ SL05 215-255 AL06/ SL06 000-005 Blackout 006-032 AF01/ SF01 033-064 AF02/ SF02 065-096 AF03/ SF03 Strobe 097-128 AF04/ SF04 129-160 AF05/ SF05 161-192 AF06/ SF06 193-224 AF07/ SF07 JB SYSTEMS® 13/15 ALIEN...
  • Page 16: Ir Remote Controller

    Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics. • Clean with a soft cloth using normal glass cleaning products. • Always dry the parts carefully. JB SYSTEMS® 14/15 ALIEN...
  • Page 17: Specifications

    10°C to 40°C Laser Safety Standard: EN/IEC 60825-1:2014 Size: 335x312x191mm Weight: 3.12 kg All the information is subject to change without prior notice You can download the latest version of this user manual on our website: www.jb-systems.eu JB SYSTEMS® 15/15 ALIEN...

Table of Contents