Configuration overview
Item
Label
Line
Parameter
Network
Configure the following network parameters of the phone:
IPv4 on page 20
l
LLDP on page 21
l
VLAN setting on page 21
l
SIP Transport on page 21
l
IPv4
Configure the IPv4 settings:
Item
IP Mode
When you set the IP Mode to Static, configure the following settings:
FortiFone FON-x80 Series 3.0.9 User Guide
Fortinet Technologies Inc.
Description
Call Forward – opens the Call Forward settings.
l
Line – display status of active calls on the phone.
l
Intercom – activate an intercom call.
l
Extn Appearance – display status of selected extension. Press key to place
l
call to selected extension.
Line Appearance – display status of selected line. Press key to place call
l
from selected line.
Park Appearance – display status of selected parking orbit. Press key to
l
answer call in parking orbit.
Speed Dial – configure number to dial when key is pressed.
l
Enter label to display on selected programmable key.
Select line to perform selected action on.
Used to configure value for the following types:
Extn Appearance
l
Intercom
l
Line Appearance
l
Park Appearance
l
Record
l
Speed Dial
l
To configure Network settings, the phone requires that you require the administrator
password. The default password is 23646.
Description
Select between DHCP (default) and Static.
20