Table of Contents
Advertisement
Updating Firmware
A
APPENDIX
From time to time, MOTU may provide firmware
updates for the MOTU AVB Switch to improve
performance.
To update the firmware in a MOTU AVB Switch:
1 Make sure your computer is on the same
network as the MOTU AVB Switch.
2 Make sure that your network has access to the
internet (required).
3 Go to:
https://motu.com/en-us/products/avb/avb-switch/downloads/
4 Download the MOTU Discovery app (macOS
or Windows).
5 For macOS, unzip MOTU Discovery and then
launch the app. For Windows, run MOTU
Discovery.exe to launch the app.
6 Click the Firmware Updater tab. You should
now see your switch in the list of AVB devices on
the network (Figure 2-1).
Figure 2-1: The MOTU AVB Switch in MOTU Discovery.
7 If your AVB Switch says Up to date as shown in
Figure 2-1 for switch B, then the switch has the
latest firmware installed already.
8 If, however, the note next to the switch says
Update to x.xx as shown in Figure 2-1 for switch A,
click the blue arrow to update to the latest
firmware version.
Figure 2-2: After updating the firmware, the switch reboots and re-
acquires an IP address from your network's DHCP server.
9 When you see the message Update Successful!,
the firmware update is complete.
13
Advertisement
Table of Contents
