Using Split - Casio CTK-691 User Manual

CTK691E01-01.book 67 ページ ２００３年９月２９日 月曜日 午後４時４７分
5.
Press the LAYER button again to unlayer the
tones and return the keyboard to normal.
Turning on layering switches the currently selected part
from Part 1 to Part 2, and displays the layered tone. At that
time, you can use the [
switch between parts. Turning off layering returns to Part 1.
The main tone sounds over Channel 1, while the layered
tone sounds over Channel 2. You can also use the Mixer to
change the tone and volume settings for these channels.
Note that layering is not possible during record standby or
recording in the Song Memory Mode, or while you are
using the SMF Player Mode.

Using Split

With split you can assign two different tones (a main tone and
a split tone) to either end of the keyboard, which lets you play
one tone with your left hand and another tone with your right
hand. For example, you could select STRINGS 1 as the main
(high range) tone and PIZZICATO GM as the split (low
range) tone, putting an entire string ensemble at your
fingertips.
Split also lets you specify the split point, which is the location
on the keyboard where the changeover between the two tones
occurs.
Leave the MODE button in the NORMAL or FULL RANGE
CHORD position.
SPLIT
705A-E-069A
] and [ ] CURSOR buttons to
Keyboard Settings
To split the keyboard
1.
First select the main tone.
Example:
To select "348 STRINGS 1" as the main tone,
press the TONE button and then use the number
buttons to input 3, 4 and then 8.
2.
Press the SPLIT button.
1 Selected split tone
2 Pointer
3.
Select the split tone.
Example:
To select "345 PIZZICATO GM" as the split tone,
use the number buttons to input 3, 4 and then 5.
4.
Specify the split point. While holding down the
SPLIT button, press the keyboard key where
you want the leftmost key of the high end range
to be.
Example:
To specify G3 as the split point, press the G3 key.
5.
Now try playing something on the keyboard.
Every key from F#3 and below is assigned the
PIZZICATO GM tone, while every key from G3
and above is assigned the STRINGS 1 tone.
6.
Press the SPLIT button again to unsplit the
keyboard and return it to normal.
E-67