Table of Contents
Advertisement
CTK691E01-01.book 91 ページ ２００３年９月２９日 月曜日 午後４時４７分
3:
High Gain (Range: 0 to 127)
Adjusts the high range enhancer gain.
14 :Ring Modulator
Function
This is a ring modulator (AM modulator) that makes it
possible to modulate the frequency of internal oscillator
(OSC) in accordance with an internal LFO.
Parameters
0:
OSC Frequency (Range: 0 to 127)
Sets the reference frequency of the internal
OSC.
1:
LFO Rate (Range: 0 to 127)
Adjusts the rate of the LFO.
2:
LFO Depth (Range: 0 to 127)
Adjusts the depth of the LFO.
3:
Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
4:
Dry Level (Range: 0 to 127)
Adjusts the level of the original sound.
15 :Lo-Fi
Function
This is an effector that reproduces a retro-type Lo-Fi
sound using Noise Generator 1 (phonograph record
player type scratch noise generator) and Noise Generator
2 (FM radio type white noise and pink noise continuous
noise generator), and by noise modulation (amplitude
modulation = AM) and distortion of frequency
characteristics.
Parameters
0:
Noise Level 1 (Range: 0 to 127)
Adjusts the level of Noise Generator 1.
1:
Noise Density 1 (Range: 0 to 127)
Adjusts the noise density of Noise Generator 1.
2:
Noise Level 2 (Range: 0 to 127)
Adjusts the level of Noise Generator 2.
3:
Noise Density 2 (Range: 0 to 127)
Adjusts the noise density of Noise Generator 2.
4:
Tone (Range: 0 to 127)
Adjusts the tone.
5:
Resonance (Range: 0 to 127)
Adjusts the resonance of the sound.
6:
Bass(Range: –64 to 0 to +63)
Adjusts the volume of low sounds.
705A-E-093A
DSP Algorithm List
7:
Level (Range: 0 to 127)
Adjusts the output level.
16 :1-Phase Chorus
Function
This is monaural chorus in accordance with a sine wave
LFO.
Parameters
0:
LFO Rate (Range: 0 to 127)
Adjusts the rate of the LFO.
1:
LFO Depth (Range: 0 to 127)
Adjusts the depth of the LFO.
2:
Feedback (Range: –64 to 0 to +63)
Adjusts the feedback of the sound.
3:
Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
17 :Sin 2-Phase Chorus
Function
This is stereo chorus in accordance with a sine wave LFO.
Parameters
0:
LFO Rate (Range: 0 to 127)
Adjusts the rate of the LFO.
1:
LFO Depth (Range: 0 to 127)
Adjusts the depth of the LFO.
2:
Feedback (Range: –64 to 0 to +63)
Adjusts the feedback of the sound.
3:
Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
18 :3-Phase Chorus
Function
This is 3-phase chorus in accordance with two LFOs of
with different sine wave rates.
Parameters
0:
Rate1 (Fast LFO Rate) (Range: 0 to 127)
Adjusts the rate of LFO1.
1:
Depth1 (Fast LFO Depth) (Range: 0 to 127)
Adjusts the depth of LFO1.
2:
Rate2 (Slow LFO Rate) (Range: 0 to 127)
Adjusts the rate of LFO2.
3:
Depth2 (Slow LFO Depth) (Range: 0 to 127)
Adjusts the depth of LFO2.
E-91
- Quick Links:
- Selecting Rhythm
Hide quick links:
Advertisement
Table of Contents
